To remove an American Standard shower handle, turn off the water supply, remove the decorative cap, unscrew the handle, and detach the cartridge. This guide will provide you with step-by-step instructions on how to remove the handle, allowing you to make necessary repairs or upgrades to your shower fixture.
Whether you’re dealing with a leaky handle or simply want to replace an outdated style, removing the American Standard shower handle is a straightforward process that can be done with basic tools and minimal effort. By following these simple steps, you can easily remove the handle and proceed with any necessary repairs or updates to your shower faucet.
Credit: terrylove.com
Preparing For Removal
Before you can remove the American Standard shower handle, it’s important to take a few necessary steps to ensure a smooth and successful process. This section will guide you through the preparations required for removing the handle.
Turning Off The Water Supply
The first step in preparing to remove the American Standard shower handle is to turn off the water supply. This will prevent any water flow while you work on the handle. Here’s how you can do it:
- Locate the main water shut-off valve for your shower. It is usually located near the water meter.
- Turn the valve clockwise to shut off the water supply. Ensure that it is fully closed.
- To make sure the water flow is completely stopped, turn on the shower and let any excess water drain out. This will also release any pressure remaining in the pipes.
- Once there is no more water coming out, turn off the shower and proceed to the next step.
Gathering Necessary Tools
Now that you have turned off the water supply, it’s time to gather the necessary tools for removing the American Standard shower handle. Having the right tools will make the process much easier and more efficient. Here are the tools you will need:
| Tools | Description |
|---|---|
| Adjustable wrench | A tool used to hold or turn nuts and bolts of different sizes. |
| Phillips screwdriver | A type of screwdriver with a cross-shaped tip, used to drive screws. |
| Allen wrench | A hexagonal-shaped wrench used to tighten or loosen hex screws. |
Make sure you have these tools readily available before you begin the removal process. It’s always better to be well-prepared to avoid any unnecessary delays.
Credit: www.doityourself.com
Removing The Handle
To remove an American Standard shower handle, first, tightly grip the escutcheon plate and carefully pull it off. Then, use a screwdriver to unscrew the screw securing the handle in place. Once the screw is removed, gently pull the handle off the valve stem.
The first step in removing the American Standard shower handle is to expose the handle set screw. This screw holds the handle in place and needs to be loosened before the handle can be removed. Follow these simple steps to successfully remove the handle:Exposing The Handle Set Screw
To expose the handle set screw, you’ll need to locate the decorative cap covering the screw. Look closely at the base of the handle for a round cap that can be pried off with a flathead screwdriver. Insert the screwdriver into the small gap between the cap and the handle base, and gently pry it off. Set the cap aside in a safe place to avoid losing it during the process.Loosening The Set Screw
Once the decorative cap is removed, you can access the set screw that holds the handle in place. Look for a small screw recessed into the handle base. Use an appropriately-sized Allen wrench to loosen the set screw by turning it counterclockwise. Keep in mind that the screw may be tightly fastened, so a bit of effort may be needed to break it loose.Pulling Off The Handle
After the set screw is loosened, you can proceed to pull off the handle. With one hand firmly grasping the handle, gently wiggle it back and forth while pulling it straight off the valve stem. It may take a bit of force to remove the handle, but be careful not to use too much as this could cause damage. Once the handle is successfully removed, you can proceed with any further repairs or replacements needed. Remember to refer to the manufacturer’s instructions for your specific shower model for any additional guidance.Accessing The Cartridge
When it comes to removing the American Standard shower handle, accessing the cartridge is a crucial step in the process. Once you have successfully removed the trim plate or cover, you will be able to identify and remove the cartridge, allowing you to proceed with the necessary maintenance or replacement. Let’s take a look at how to access the cartridge in your American Standard shower handle.
Removing The Trim Plate Or Cover
Start by locating the main valve or handle cover of your American Standard shower. Using a flathead screwdriver, carefully pry off the trim plate or cover to reveal the inner mechanisms. Be gentle to avoid causing damage to the surrounding surfaces or the trim plate itself.
Identifying And Removing The Cartridge
Once the trim plate or cover is removed, you will be able to identify the cartridge within the handle. It’s typically located behind or beneath the handle assembly. Use a cartridge removal tool or a pair of pliers to carefully extract the cartridge from its housing. Take note of the cartridge orientation and any additional components attached to it for proper reinstallation later on.
Inspecting And Replacing
Learn how to easily remove an American Standard shower handle with these step-by-step instructions. Keep your bathroom in top shape with this simple inspection and replacement process.
Inspecting The Cartridge
Inspecting the cartridge is crucial to identify any issues affecting the shower handle’s performance. Take note of any cracks or signs of wear on the cartridge component. Look for any leaks or dripping water when the shower handle is not in use. Use a flashlight if necessary to get a clearer view of the cartridge condition.Replacing The Cartridge If Necessary
When replacing the cartridge, ensure the water supply to the shower handle is shut off. Unscrew the handle and remove it carefully to access the cartridge inside. Use an appropriate tool to unscrew the cartridge and lift it out gently. Install the new cartridge following the manufacturer’s instructions for your specific model.Reassembling The Shower Handle
Once you have successfully removed the American Standard shower handle, it’s time to put everything back together. Follow these simple steps to reassemble the shower handle effortlessly:
Replacing The Cartridge And Trim Plate
- Insert the new cartridge into the handle, ensuring it fits snugly.
- Place the trim plate over the cartridge, aligning it correctly.
- Tighten the screws to secure the trim plate in place.
Securely Attaching The Handle
- Slide the handle back onto the stem, lining up the screw holes.
- Insert and tighten the handle screw to secure it in place.
- Ensure the handle is in the correct position for smooth operation.
By following these steps, you can easily reassemble the American Standard shower handle and restore proper functionality to your shower. Don’t hesitate to reach out to a professional if you encounter any difficulties.
Credit: terrylove.com
Frequently Asked Questions On How To Remove American Standard Shower Handle
How Do I Get The Handle Off The Shower?
To remove the handle from your shower, follow these steps: 1. Turn off the water supply. 2. Locate the screw or set screw on the handle. 3. Use a screwdriver or Allen wrench to loosen and remove the screw. 4.
Gently pull the handle straight outwards to remove it from the valve.
How Do You Tighten An American Standard Shower Handle?
To tighten an American standard shower handle, use a screwdriver to remove the screw cover. Then, tighten the screw that holds the handle in place. Finally, replace the screw cover and test the handle for stability.
How Do You Remove An American Standard Faucet Handle Without Screws?
To remove an American Standard faucet handle without screws, use a flathead screwdriver or an Allen wrench. Gently pry off the cap on top of the handle to access the screwless attachment mechanism. Unscrew the handle counterclockwise to detach it from the faucet.
How Do I Know What Model American Standard Shower Faucet I Have?
To identify your American Standard shower faucet model, check the product packaging or user manual. You can also look for a model number on the faucet itself. If not visible, contact American Standard customer service for assistance.
Conclusion
Removing an American Standard shower handle is a simple DIY task. With the right tools and steps, you can successfully disassemble the handle and fix any issues. By following the instructions in this guide, you will be able to maintain your shower’s functionality and ensure a pleasant bathing experience.
