How to Light Coconut Coals Without Stove

0 0

To light coconut coals without a stove, use a coil burner or portable gas stove. Place the coal on the burner and light it until hot.

Are you a hookah enthusiast looking to enjoy your favorite shisha flavors but don’t have a stove handy to light your coconut coals? Worry not, as there are alternative methods you can use to get your coals burning without a stove.

Whether you’re out camping, at a friend’s house, or just prefer the convenience of not needing a stove, this guide will provide you with practical tips on how to light your coconut coals efficiently and safely. Let’s dive in and explore some simple yet effective ways to ensure your hookah session is up and running in no time!

How to Light Coconut Coals Without Stove


Using A Chimney Starter

Using a chimney starter is a simple and efficient method for lighting coconut coals without a stove. This method is popular among outdoor enthusiasts and grill masters for its ease of use and effectiveness. Let’s dive into the steps for using a chimney starter to light coconut coals.

Preparing The Chimney Starter

Before you start, ensure the chimney starter is clean and in good condition. Remove any residual ash or debris from previous uses. Place the chimney starter on a heat-resistant surface, away from any flammable materials.

Filling The Chimney Starter

Fill the chimney starter with your coconut coals. Avoid overfilling, as this can hinder the airflow. Arrange the coals in the starter so that there is ample space for the airflow to circulate, promoting even and efficient burning.

Lighting The Coconut Coals

Once the chimney starter is filled, insert crumpled newspaper or fire starter cubes into the bottom chamber. The paper or cubes will ignite and gradually heat the coals above. Avoid using lighter fluid, as it can leave a chemical taste on the coals. Let the coals burn until they are covered with a light layer of ash, indicating they are ready for use.

Using A Charcoal Blowtorch

When it comes to lighting coconut coals without a stove, using a charcoal blowtorch is an effective method that can quickly get your coals burning and ready for use.

Preparing The Blowtorch

Before diving into the process, make sure your charcoal blowtorch is properly fueled and ready for use.

Positioning The Coconut Coals

Arrange your coconut coals in a well-ventilated area, ensuring they are not too close together to allow for proper airflow.

Lighting The Coconut Coals

Hold the blowtorch a few inches away from the coals, igniting them in a circular motion until they start to glow evenly.

Using A Heat Gun

  1. Ensure the heat gun is plugged in and ready for use.
  2. Gather the coconut coals and place them in a safe, heat-resistant area.
  3. Put on protective gloves and safety goggles to prevent any burns or accidents.
  • Place the coconut coals on a stable surface, ensuring they are not near any flammable materials.
  • Keep a safe distance between the heat gun and the coconut coals to prevent overheating.
  • Ensure proper ventilation in the area to prevent smoke buildup.
  1. Turn on the heat gun and aim it directly at the coconut coals.
  2. Move the heat gun around to evenly distribute the heat and ignite the coals.
  3. Continue applying heat until the coconut coals are fully lit and glowing red.


Using An Electric Charcoal Starter

Using an Electric Charcoal Starter offers a convenient and efficient way to light coconut coals without a stove. This method eliminates the need for open flames and accelerates the lighting process, providing a hassle-free experience for hookah enthusiasts.

Preparing The Electric Charcoal Starter

Before using an electric charcoal starter to light coconut coals, ensure that the device is clean and free of any debris. Insert the appropriate amount of coconut coals into the starter, making sure not to overload it. Placing the coals in a single layer will facilitate even heating and faster ignition.

Positioning The Coconut Coals

Once the electric charcoal starter is prepared, position it in a well-ventilated area, away from flammable materials. It is essential to place the starter on a heat-resistant surface to prevent any damage. Furthermore, ensure that the coconut coals are evenly distributed within the starter to promote consistent heating.

Lighting The Coconut Coals

After positioning the coconut coals, plug in the electric charcoal starter and switch it on. Allow the coals to heat for the recommended duration specified by the manufacturer. As the coals start to glow and emit heat, carefully monitor the process to prevent overheating and ensure a safe lighting experience.

Using A Propane Torch

Lighting coconut coals without a stove can be easily done using a propane torch. Simply position the torch above the coals and ignite them with the flame, ensuring an efficient and quick ignition process.

Using a propane torch is an effective and efficient way to light your coconut coals without a stove. Not only does it provide a quick ignition, but it also ensures that your coals burn evenly for a consistent heat source. In this section, we will walk you through the steps to successfully light your coconut coals using a propane torch.

Preparing The Propane Torch

Before you begin lighting your coconut coals, it’s important to properly prepare your propane torch for use. Follow these steps:
  1. Ensure that your propane tank is securely attached to the torch.
  2. Check that the gas valve on the tank is closed before attaching the torch.
  3. Attach the torch to the propane tank by twisting it on clockwise.
  4. Tighten the torch securely to avoid any gas leaks.
  5. Once the torch is attached, it’s time to position your coconut coals for lighting.

Positioning The Coconut Coals

Properly positioning your coconut coals is crucial for a successful ignition. Follow these steps:
  1. Place a fireproof surface, such as a metal tray or heat-resistant table, in a well-ventilated area.
  2. Arrange your coconut coals in a single layer on the fireproof surface. Make sure the coals are not touching each other to allow for better air circulation.
  3. Position the propane torch so the flame is a few inches away from the coconut coals.
  4. Ensure that there are no flammable materials nearby to prevent any accidental fires.
  5. Now that your coconut coals are properly positioned, it’s time to ignite them using the propane torch.

Lighting The Coconut Coals

With your propane torch and coconut coals in place, follow these steps to light your coals:
  1. Hold the propane torch at a slight angle towards the coconut coals.
  2. Turn on the gas valve on the propane tank slowly.
  3. Ignite the propane torch using either a built-in igniter or a separate lighting source, such as a long lighter or a matchstick.
  4. Once the flame is lit, direct the flame towards the coconut coals, starting from one end of the coals.
  5. Maintain the flame on the coals until you notice a red glow and sparks starting to form.
  6. Continue moving the propane torch along the coconut coals until all the coals are evenly lit.
With these steps, you’ll be able to light your coconut coals using a propane torch quickly and effortlessly. Enjoy your smoke session with a consistent and reliable heat source powered by these beautifully lit coconut coals.
How to Light Coconut Coals Without Stove


Frequently Asked Questions Of How To Light Coconut Coals Without Stove

How Do You Light Coconut Charcoal Without A Stove?

To light coconut charcoal without a stove, use a chimney starter or lighter cubes. Place charcoal in the chimney or on a heat-resistant surface, then ignite the cubes underneath. Let the charcoal heat until it’s ashy, then use for grilling.

This method is safe and efficient.

Can You Light Coconut Coals With A Lighter?

Yes, you can light coconut coals with a lighter. Simply hold the lighter to the coal until it ignites.

How Do You Burn Coconut Coal Easily?

To burn coconut coal easily, ensure it’s dry and has enough airflow. Start with small pieces and gradually increase size. Use a chimney starter or electric starters for quick ignition. Maintain steady heat by adjusting vents. Clean ash regularly to prevent airflow blockage.

How Do You Light Coconut Coals In The Oven?

To light coconut coals in the oven, place them directly on the oven rack. Heat the oven to 400-450°F and let the coals sit for 5-10 minutes. Use oven mitts to remove, and they’re ready for use.


Lighting coconut coals without a stove is an accessible and convenient method for any hookah enthusiast. By using simple household items and following safety precautions, you can enjoy a hassle-free and enjoyable hookah session. Now you can easily elevate your hookah experience without the need for a traditional stove.

Leave A Reply

Your email address will not be published.