How to Install Front License Plate on Hyundai Elantra

0 4

To install a front license plate on a Hyundai Elantra, follow these steps: First, locate the front license plate bracket on the vehicle’s front bumper. Then, align the holes on the license plate with the holes on the bracket, and insert screws or bolts through these holes to secure the plate in place.

How to Install Front License Plate on Hyundai Elantra


Tools And Materials

When installing a front license plate on your Hyundai Elantra, having the right tools and materials is essential. Let’s take a look at what you’ll need to get the job done:

Required Tools

  • Screwdriver
  • Drill
  • Tape measure

Materials Needed

  1. Front license plate bracket
  2. Screws
  3. Plastic inserts
  4. Marker


Step-by-step Guide

Welcome to our step-by-step guide on how to properly install a front license plate on your Hyundai Elantra. Having a license plate attached securely not only ensures compliance with legal requirements but also enhances the aesthetic appeal of your vehicle. In this guide, we will walk you through the process to make it easy and hassle-free. Follow these simple steps to install your front license plate in no time.

Locate Mounting Holes

The first step in installing the front license plate on your Hyundai Elantra is to locate the mounting holes on the front bumper. These holes are specifically designed by the manufacturer for attaching the license plate bracket. To find them, examine the front bumper carefully, usually around the center or on the sides. Refer to your vehicle’s manual or consult the manufacturer’s website for any specific instructions on locating the mounting holes for your particular Elantra model.

Attach License Plate Bracket

Once you have located the mounting holes, it’s time to attach the license plate bracket. The license plate bracket acts as a support for your license plate and ensures it stays securely fastened to the front bumper. Take your license plate bracket and align it with the mounting holes. Insert the screws or bolts provided with the bracket into the holes and tighten them until snug using a screwdriver or a wrench. Ensure the bracket is centered and level to maintain a professional appearance.

Secure The License Plate

With the license plate bracket securely attached to your Hyundai Elantra’s front bumper, it’s time to install the license plate itself. Line up the holes on the license plate with the holes on the bracket. Insert the screws or bolts through the holes in the license plate and into the bracket. Use a screwdriver or a wrench to tighten the screws or bolts until the license plate is firmly held in place. Ensure the license plate is centered and straight for a neat and uniform look.

To prevent any damage or loosening of the license plate, periodically check the screws or bolts for tightness. If necessary, tighten them to maintain a secure attachment. Remember, maintaining a properly installed front license plate not only avoids legal repercussions but also contributes to the overall appearance of your Hyundai Elantra.

Now that you have successfully installed your front license plate, you are ready to hit the road with confidence, knowing that your vehicle is compliant with regulations and looking sharp.

Tips For Maintenance

Learn how to properly install a front license plate on your Hyundai Elantra with these helpful maintenance tips. Ensure a secure and professional attachment to avoid any issues on the road. Proper installation is key for both aesthetics and safety.

Cleaning And Care

Proper cleaning and care are essential to maintain the appearance and functionality of your newly installed front license plate on the Hyundai Elantra. By following these tips, you can keep your license plate looking its best and ensure its secure fit.

  1. Regular cleaning: Start by gently rinsing the license plate with water to remove any loose dirt or debris. Then, use a mild soap or car wash solution and a soft cloth or sponge to clean the plate thoroughly. Avoid using abrasive cleaners or scrubbing too vigorously, as this can scratch the surface.
  2. Removing stubborn stains: If there are stubborn stains or grime on the license plate, you can try using a specialized cleaner or even a mixture of baking soda and water. Apply the cleaner onto a soft cloth and gently scrub the affected area until the stain is removed. Rinse thoroughly with water afterwards.
  3. Drying: After cleaning, make sure to dry the license plate thoroughly using a soft, lint-free cloth. This will help prevent water spots and maintain the plate’s appearance.

Checking For Secure Fit

Regularly checking the secure fit of your front license plate is crucial to ensure it does not come loose while driving. Follow these simple steps to ensure the license plate stays firmly in place:

  1. Tighten screws or bolts: Inspect the screws or bolts that hold the license plate bracket in place on your Hyundai Elantra. If any of them appear loose, use a screwdriver or wrench to tighten them securely. Take care not to overtighten as this can damage the bracket.
  2. Inspect mounting holes: Check the mounting holes on both the license plate and the bracket for any signs of wear or damage. If you notice any cracks or elongated holes, consider replacing the license plate or bracket to ensure a secure fit.
  3. Test stability: Gently shake the license plate to test its stability. If it moves or rattles excessively, reposition the plate and tighten the screws or bolts further. You may also use adhesive-backed foam pads or bumper plugs to provide additional stability.
How to Install Front License Plate on Hyundai Elantra


Frequently Asked Questions Of How To Install Front License Plate On Hyundai Elantra

How Do You Put A Front License Plate On Without Holes?

You can use adhesive or magnetic mounting kits for a no-drill front license plate installation. Ensure surface is clean and dry before applying adhesive. For magnetic kits, place the metal plate behind the bumper and attach the license plate with the magnets.

Both options provide a secure and hole-free mounting solution.

How Do You Put The Front License Plate On A 2023 Elantra?

To put the front license plate on a 2023 Elantra, use the provided screw holes on the front bumper. Align the plate with the holes and secure it with screws. Make sure it’s centered and level for proper placement. Follow the car’s manual for specific instructions.

How To Install 2017 Hyundai Elantra Front License Plate Bracket?

To install the 2017 Hyundai Elantra front license plate bracket, align it with existing holes on the bumper and secure using screws provided.

How Do You Attach A Front Number Plate?

To attach a front number plate, follow these steps: 1. Align the plate with the mounting holes on the bumper. 2. Insert screws or bolts through the holes and tighten them securely. 3. Check that the plate is level and centered.

4. Ensure the plate is visible and doesn’t obstruct the headlights. 5. Finally, verify that the plate is securely attached and won’t fall off while driving.


To sum up, installing a front license plate on your Hyundai Elantra is a simple task that can enhance the overall look of your vehicle. By following these easy steps, you can ensure that your license plate is securely mounted and compliant with regulations.

Keep your car looking sharp!

Leave A Reply

Your email address will not be published.